Filter
Top Products
4-39
ENG
CLUTCH
NOTE:
NOTE:
3. Tighten:
Sclutch boss nut
1
While holding the clutch boss with the universal
clutch holder
2
, tighten the clutch boss nut.
Universal clutch holder
90890-04086
Clutch boss nut
70 Nm (7.0 mSkg)
4. Bend the lock washer tab along a flat side of
the nut.
5. Lubricate:
Slong clutch push rod
1
Sball
2
Sshort clutch push rod
3
(with the recommended lubricant)
Recommended lubricant
Lithium soap base grease
6. Install:
Sclutch spring plate seat
1
Sclutch spring plate
2
Install the spring plate with the letters “OUT
SIDE” facing outward.