Filter
Top Products
4-38
ENG
CLUTCH
NOTE:
NOTE:
EAS00288
CHECKING THE CLUTCH PUSH RODS
1. Check:
SO-ring
1
Sshort clutch push rod
2
Slong clutch push rod
3
Sball
4
Sbearing
5
Cracks/damage/wear ! Replace the de-
fective part(-s).
2. Measure:
Slong clutch push rod bending limit
Out of specification ! Replace the long
clutch push rod.
Long clutch push rod bending limit
0.3 mm
INSTALLING THE CLUTCH
1. Install:
Sclutch housing
1
Engage the notch of clutch housing and the pro-
jection on the oil pump drive gear.
2. Install:
Sbearing
1
Sspacer
2
Sthrust washer
3
Install the spacer with the two screw holes fac-
ing towards the clutch boss.