Filter
Top Products
4-87
ENG
TRANSMISSION
NOTE:
NOTE:
2. Measure:
Sdrive axle runout
(with a centering device and dial gauge
1
)
Out of specification ! Replace the drive
axle.
Drive axle runout limit
0.06 mm
3. Check:
Stransmission gears
Blue discoloration/pitting/wear ! Replace
the defective gear(-s).
Stransmission gear dogs
Cracks/damage/rounded edges ! Replace
the defective gear(-s).
4. Check:
Stransmission gear engagement
(each pinion gear to its respective wheel
gear)
Incorrect ! Reassemble the transmission
axle assemblies.
When reassembling the main axle, press the
2nd pinion gear
1
onto it
2
as shown.
5. Check:
Stransmission gear movement
Rough movement ! Replace the defective
part(-s).
6. Check:
Scirclips
Damage/bends/looseness ! Replace.
EAS00426
INSTALLING THE SHIFT FORKS AND SHIFT
DRUM ASSEMBLY
1. Install:
Sshift drum aseembly
1
Sshift fork guide bars
2
Sshift fork “R”
3
Sshift fork “C”
4
Sshift fork “L”
5
The embossed marks on the shift forks should
face towards the right side of the engine and be
in the following sequence: “R”, “C”, “L”.