Filter
Top Products
7-21
ELECTRIC STARTING SYSTEM
ELEC
NOTE:
New
5 Nm (0.5 mSkg)
NOTE:
5. Measure:
Sbrush length
a
Out of specification ! Replace the brushes
as a set.
Min. brush length
5 mm
6. Measure:
Sbrush spring force
Out of specification ! Replace the brush
springs as a set.
Brush spring force
7.65 X 10.01 N (0.780 X 1.021 kg)
7. Check:
Sgear teeth
Damage/wear ! Replace the gear.
8. Check:
Soil seal
Damage/wear ! Replace the defective
part(-s).
EAS00772
Assembling The Starter Motor
1. Install:
Sbrush holder
1
Align the tab
a
on the brush holder with the slot
b
in the starter motor rear cover.
2. Install:
Sstarter motor yoke
1
SO-rings
2
Sstarter motor front cover
3
Sstarter motor rear cover
4
Sbolts
Align the match marks
a
on the starter motor
yoke with the match marks
b
on the front and
rear covers.