Filter
Top Products
AI2524 Router Card User’s Manual
Page 7-10 August 1997
2524UM
2. List information about Flash memory, including system image
filenames, amounts of memory used and remaining, and Flash par-
titions.
show flash [all | chips | detailed | err |
partition
number
[all | chips | detailed |
err] | summary]
3. View the console output generated during the Flash load helpe
operation.
show flh-log
4. List the configuration information in running memory.
show running-config
5. List the startup configuration information. The startup configura-
tion is usually NVRAM.
show startup-config
6. List the system software release version, configuration register
setting, and so on.
show version
You can also use th
o
command in ROM monitor mode to list th
configuration register settings on some models.
The Flash memory content listing does not include the checksum of in-
dividual files. To recompute and verify the image checksum after th
image is copied into Flash memory, type the following in EXEC
mode:
verify flash
When you enter this command, the screen prompts you for the file-
name to verify. By default, it prompts for the last (most recent) file in
Flash. Press <Enter> to recompute the default file checksum, or enter
the filename of a different file at the prompt. Note that the checksum
for microcode images is always 0x0000.