Filter
Top Products
AI2524 Router Card User’s Manual
Page 4-26 August 1997
2524UM
Edit Command Lines that Wrap
The Cisco IOS software assumes that you have a terminal screen that
is 80 characters wide. If your terminal displays a different number of
characters on each line, use the
terminal width
command.
When the cursor reaches the right margin, the command line shifts 10
spaces to the left. You cannot see the first ten characters of the line, but
you can scroll back and check the syntax at the beginning of the com-
mand. To scroll back, press <Ctrl-B> or the left arrow key repeatedly
until you scroll back to the beginning of the command entry, or press
<Ctrl-A> to return directly to the beginning of the line.
In this example, the
access-list
command entry extends beyond
one line. When the cursor first reaches the end of the line, the line is
shifted 10 spaces to the left and is redisplayed. The dollar sign ($) in
dicates that the line has been scrolled to the left. Each time the cursor
reaches the end of the line, the line is again shifted 10 spaces to the left.
Router(config)# access-list 101 permit tcp 131.108.2.5 255.255.255.0 131.108
Router(config)# $ 101 permit tcp 131.108.2.5 255.255.255.0 131.108.1.20 255.2
Router(config)# $t tcp 131.108.2.5 255.255.255.0 131.108.1.20 255.255.255.0
Router(config)# $108.2.5 255.255.255.0 131.108.1.20 255.255.255.0 eq 45
When you have completed the entry, press <Ctrl-A> to check the com-
plete syntax before pressing <Enter> to execute the command. The
dollar sign ($) appears at the end of the line to indicate that the line has
been scrolled to the right:
Router(config)# access-list 101 permit tcp 131.108.2.5 255.255.255.0 131.108$