Filter
Top Products
AI2524 Router Card User’s Manual
Page 3-4 August 1997
2524UM
Save the
Configuration
To make your changes permanent, enter the
copy running-con-
fig startup-config
command at the enable prompt:
Router# copy running-config startup-config
The router is now configured and will boot with the configuration you
entered.
Configuration
Overviews
This section describe the software tools you can use to configure your
router via the Cisco IOS software:
z
Configuration Builder
z
Command Interpreter
z
Web Browser Interface
z
Use ClickStart
Use Configuration Builder
The Configuration Builder allows you to create configuration files for
multiple routers or access servers without knowing the command-line
language or syntax. It is a Microsoft Windows-based application that
runs on an IBM PC or compatible computer.
If you do not have the platform required to run Configuration Builder,
configure your device using the command interpreter.
Use the Command Interpreter
You can build most straightforward configurations and create a con-
figuration file using the setup command facility. Refer to the Using
AutoInstall chapter for more information.
Before configuring your router or access server, you must determine
these items:
z
Which network protocols you are supporting (for example, IP and
Novell IPX)
z
The addressing plan for each network protocol