Filter
Top Products
Chapter 11: AI2524 Sync PPP Configuration Steps
August 1997 Page 11-29
2524UM
Configure Incoming VPDN Connections on the Home
Gateway
In global configuration mode, configure virtual private dialup net-
working on a home gateway router or access server:
1. Enable virtual private networking.
vpdn enable
2. Specify the remote host, the local name to use for authenticating,
and the virtual template to use.
vpdn incoming
remote-name local-name
virtual-template
number
Configure Outgoing VPDN Connections on the Network
Access Server
In global configuration mode, configure a network access server to
make outgoing L2F connections to a home gateway for VPDN:
1. Enable virtual private networking.
vpdn enable
2. Specify the remote host that is to accept L2F connections.
vpdn outgoing
domain-name local-name
ip
ip-
address
Example: Network Access Server Servicing Multiple
Domains
This example provides VDPN configurations for a single NAS and
two different gateways. The two gateways are presumably located at
two entirely separate companies. The NAS decides which company to
forward to based on the domain name that is passed by the user.
The commands also illustrate where to configure the commands
vpdn
outgoing
(on the network access server) and
vpdn incoming
(on a home gateway).
NAS1
vpdn enable
vpdn outgoing domain1.com nas1 ip 1.1.1.1
vpdn outgoing domain2.com nas2 ip 2.2.2.2