Filter
Top Products
AI2524 Router Card User’s Manual
August 1997 TOC-5
2524UM
Example: Dynamic Routing in Overlapping Areas .........................................9-13
Example: Dynamic Interdoma inRouting ........................................................9-15
Configure ISO IGRP Parameters.....................................................................9-17
Configure IS-IS Dynamic Routing ...............................................................................9-19
Enable IS-IS.....................................................................................................9-19
Examples: IS-IS Routing Configuration..........................................................9-20
Assign Multiple Area Addresses to IS-IS Areas..............................................9-23
Examples: NETs Configuration .......................................................................9-24
Example: Router in Two Areas........................................................................9-25
Configure IS-IS Parameters .............................................................................9-27
Configure IS-IS Interface Parameters..............................................................9-30
Configure CLNS Static Routing ...................................................................................9-33
Enable Static Routes ........................................................................................9-33
Examples: Basic Static Routing.......................................................................9-34
Example: Static Intradoma inRouting..............................................................9-36
Example: Static Interdoma inRouting..............................................................9-38
Configure Variations of the Static Route .........................................................9-41
Map NSAP Addresses to Media Addresses.....................................................9-41
Configure Miscellaneous Features................................................................................9-43
Specify Shortcut NSAP Addresses..................................................................9-43
Use the IP Domain Name System to Discover ISO CLNS Addresses ............9-44
Create Packet-Forwarding Filters and Establish Adjacencies .........................9-44
Examples: CLNS Filter....................................................................................9-45
Redistribute Routing Information....................................................................9-45
Examples: Route Map......................................................................................9-48
Specify Preferred Routes .................................................................................9-49
Configure ES-IS Hello Packet Parameters ......................................................9-49
Configure CLNS over WANs .......................................................................................9-51
Example: ISO CLNS over X.25.......................................................................9-51
Enhance ISO CLNS Performance.................................................................................9-53
Specify the MTU Size......................................................................................9-54
Disable Checksums..........................................................................................9-54
Disable Fast Switching Through the Cache.....................................................9-54
Set the Congestion Threshold ..........................................................................9-55
Transmit Error Protocol Data Units (ERPDUs)...............................................9-55
Control Redirect Protocol Data Units (RDPDUs)...........................................9-55
Configure Parameters for Locally Sourced Packets ........................................9-56
Example: Performance Parameter ..................................................................9-56
Monitor and Maintain the ISO CLNS Network............................................................9-57
Configure TARP on ISO CLNS....................................................................................9-59
TARP Configuration Task List........................................................................9-60
Enable TARP and Configure a TARP TID......................................................9-60
Disable TARP Caching....................................................................................9-61
Disable TARP PDU Origination and Propagation...........................................9-61
Configure Multiple NSAP Addresses..............................................................9-61
Configure Static TARP Adjacency and Blacklist Adjacency..........................9-61
Determine TIDs and NSAPs............................................................................9-62
Configure TARP Timers..................................................................................9-63