Filter
Top Products
Chapter 13: AI2524 Frame Relay Configuration Steps
August 1997 Page 13-47
2524UM
Monitor the
Frame Relay
Connections
To monitor Frame Relay connections, perform any of these tasks in
EXEC mode:
z
Clear dynamically created Frame Relay maps, which are created
by the use of Inverse ARP.
clear frame-relay-inarp
z
Display information about Frame Relay DLCIs and the LMI.
show interfaces serial
number
z
Display LMI statistics.
show frame-relay lmi [
type number
]
z
Display the current Frame Relay map entries.
show frame-relay
map
z
Display PVC statistics.
show frame-relay pvc [
type number
[
dlci
]]
z
Display configured static routes.
show frame-relay
route
z
Display Frame Relay traffic statistics.
show frame-relay traffic
z
Display information about the status of LAPF.
show frame-relay lapf
z
Display all the SVCs under a specified map list.
show frame-relay svc
maplist
Example: Configuration Providing Backward Compatibility
This example configuration provides backward compatibility and in-
teroperability with earlier versions that are not compliant with RFC
1490. The ietf keyword is used to generate RFC 1490 traffic. This con-
figuration is possible because of the flexibility provided by separately
defining each map entry.
encapsulation frame-relay
frame-relay map ip 131.108.123.2 48 broadcast ietf