Filter
Top Products
AI2524 Router Card User’s Manual
Page 13-24 August 1997
2524UM
The
broadcast
keyword is required for routing protocols such as
OSI protocols and the Open Shortest Path First (OSPF) protocol. Se
the
frame-relay map
command description in the Wide-Area
Networking Command Reference for more information about using
the
broadcast
keyword.
Example: IPX Routes over Frame Relay Subinterfaces
This example configures a serial interface for Frame Relay encapsula-
tion and sets up multiple IPX virtual networks corresponding to Frame
Relay subinterfaces:
ipx routing 0000.0c02.5f4f
!
interface serial 0
encapsulation frame-relay
interface serial 0.1 multipoint
ipx network 1
frame-relay map ipx 1.000.0c07.d530 200 broadcast
ipx network 2
frame-relay map ipx 2.000.0c07.d530 300 broadcast
For subinterface serial 0.1, the router at the other end might be config-
ured as:
ipx routing
interface serial 2 multipoint
ipx network 1
frame-relay map ipx 1.000.0c02.5f4f 200 broadcast
Configure Transparent Bridging for Frame Relay
Transparent bridging for Frame Relay encapsulated serial and HSSI
interfaces is supported on the AI2524 router. Transparent bridging for
Frame Relay encapsulated serial interfaces is supported on our access
servers.
You can configure transparent bridging for point-to-point or point-to-
multipoint subinterfaces.
Note: All PVCs configured on a subinterface belong to the same
bridge group.