Filter
Top Products
Chapter 11: AI2524 Sync PPP Configuration Steps
August 1997 Page 11-25
2524UM
Example: Multilink PPP on Multiple ISDN Interfaces
This example configures multiple ISDN BRIs to belong to the same di-
aler rotary group for Multilink PPP. Th
dialer rotary-group
command is used to assign each of the ISDN BRIs to that dialer rotary
group.
interface BRI0
no ip address
encapsulation ppp
dialer idle-timeout 500
dialer rotary-group 0
dialer load-threshold 255 balanced
!
interface BRI1
no ip address
encapsulation ppp
dialer idle-timeout 500
dialer rotary-group 0
dialer load-threshold 255 balanced
!
interface BRI2
no ip address
encapsulation ppp
dialer idle-timeout 500
dialer rotary-group 0
dialer load-threshold 255 balanced
!
interface Dialer0
ip address 99.0.0.2 255.0.0.0
encapsulation ppp
dialer in-band
dialer idle-timeout 500
dialer map ip 99.0.0.1 name atlanta broadcast 81012345678901
dialer load-threshold 255 balanced
dialer-group 1
ppp authentication chap
ppp multilink