Filter
Top Products
Chapter 12: AI2524 X.25 Configuration Steps
August 1997 Page 12-55
2524UM
lows for successful
ping
commands. A similar configuration is re
quired for the same subnet IP addresses to work across X.25.
Figure 12-8:Parallel Serial Lines to an X.25 Network
Note: All four serial ports configured for the two routers in the
following configuration example must be assigned to the
same IP subnet address space. In this case, the subnet is
172.20.170.0.
Configuration for Router A
interface serial 1
ip 172.20.170.1 255.255.255.0
x25 address 31370054068
x25 map ip 172.20.170.3 31370054065
x25 map ip 172.20.170.4 31370054065
!
interface serial 2
ip 172.20.170.2 255.255.255.0
x25 address 31370054069
x25 map ip 172.20.170.4 31370054067
x25 map ip 171.20.170.3 31370054067
(allow either destination address)
x25 31370054068 alias serial2
x25 31370054069 alias serial1