Filter
Top Products
AI2524 Router Card User’s Manual
Page 7-32 August 1997
2524UM
The system tries to bring up at least the boot ROM image if it cannot
boot an image from Flash memory. Before reinitiating the
copy
tftp flash
command, you must set the configuration register boot
field to a nonzero value, using th
config-register
global con-
figuration command.
The
copy tftp flash
command initiates a series of prompts to
which you must provide responses. This example illustrates this dia
log:
Router# copy tftp flash
*********************** NOTICE **************************
Flash load helper v1.0
This process will accept the TFTP copy options and then terminate the current
system image to use the ROM based image for the copy. Router functionality will
not be available during that time. If you are logged in via telnet, this
connection will terminate. Users with console access can see the results of the
copy operation. **********************************************************
If terminals other than the one on which this command is executed are
active, this message appears:
There are active users logged into the system.
Proceed? [confirm] y
System flash directory:
File Length Name/status
1 2251320 abc/igs-kf.914
[2251384 bytes used, 1942920 available, 4194304 total]
Enter the IP address or the name of the remote host you are copying
from:
Address or name of remote host [255.255.255.255]? 131.108.1.111
Enter the name of the file you want to copy:
Source file name? abc/igs-kf.914