Filter
Top Products
AI2524 Router Card User’s Manual
Page 11-12 August 1997
2524UM
Configure Per-Interface IP Address Assignment
When you have defined a global default mechanism for assigning IP
addresses to dial-in peers, you can then configure the few interfaces
for which it is important to have a nondefault configuration. You can
do any of these:
1. In global configuration mode, define a nondefault address pool for
use on an interface:
z
Create one or more local IP address pools.
ip local pool
poolname
{
low-ip-address
[
high-ip-address
]}
z
Specify the interface and enter interface configuration mode.
interface
type number
z
Specify the pool for the interface to use.
peer default ip address pool
poolname
2. In global configuration mode, define DHCP as the IP address
mechanism for an interface:
z
Specify the interface and enter interface configuration mode.
interface
type number
z
Specify DHCP as the IP address mechanism on this interface.
peer default ip address pool dhcp
3. Beginning in global configuration mode, define a specific IP ad
dress to be assigned to all dial-in peers on an interface:
z
Specify the interface and enter interface configuration mode.
interface
type number
z
Specify the IP address to assign.
peer default ip address
ip-address
4. Beginning in global configuration mode, make temporary IP ad-
dresses available on a per-interface basis for dial-in asynchronous
clients using Serial Line Internet Protocol (SLIP) or Point-to-Point
Protocol (PPP):
z
Specify that the access server use a local IP address pool on all
asynchronous interfaces.
ip address-pool local