Filter
Top Products
Chapter 12: AI2524 X.25 Configuration Steps
August 1997 Page 12-43
2524UM
interface token 0
cmns enable
x25 map cmns 38.8261.17 0800.4e02.1f9f
This configuration specifies that traffic from any other interface on
Cisco Router C2 that is intended for any NSAP address with NSAP-
prefix 38.8261.18 will be switched to X.121 address 2095551000
through Serial 0.
interface serial 0
encapsulation x25
x25 address 4085551234
x25 map cmns 38.8261.18 2095551000
Configuration for Router C1
This configuration specifies that any traffic from any other interface
intended for any NSAP address with NSAP 38.8261.18 will be
switched to MAC address 0800.4e02.2abc through Ethernet 0.
interface ethernet 0
cmns enable
x25 map cmns 38.8261.18 0800.4e02.2abc
This configuration specifies that traffic from any other interface on
Cisco Router C1 that is intended for any NSAP address with NSAP-
prefix 38.8261.17 will be switched to X.121 address 4085551234
through Serial 1.
interface serial 1
encapsulation x25
x25 address 2095551000
x25 map cmns 38.8261.17 4085551234
Example: CMNS Switched over Leased Lines
This example illustrates switching CMNS over a leased line. Figur
12-7, illustrates the general network topology for a CMNS switching
application where calls are being made by resources on the opposit