Filter
Top Products
Chapter 8: Virtual LANs and GVRP
118 Section I: Using the Menus Interface
3. To view the ports of a VLAN, type O to select Config VLAN Member.
The following prompt is displayed:
Enter VLAN ID>
4. Enter the VID of the VLAN you want to view and press Enter.
The Config VLAN Member Menu is shown in Figure 30.
Figure 30. Config VLAN Member Menu
The menu displays the following information:
VLAN ID
The VID number of the VLAN.
VLAN Name
The name of the VLAN.
Port
The ports of the VLAN.
Tagging
Whether a port is a tagged or untagged member of the VLAN. An
untagged port is designated with No and a tagged port with Yes.
The selections in this Config VLAN Member menu are explained in
“Modifying a VLAN” on page 119.
AT-9000/24 Local Management System
VLAN Management -> Config VLAN Member
VLAN ID : 3 VLAN Name: Marketing
Port Tagging
----------------------------------------------------------------------
4No
5No
6Yes
7No
8No
----------------------- <COMMAND> ------------------------------------
[N]ext Page [C]hange VLAN Name [A]dd VLAN Member
[P]revious page [R]emove VLAN Member [Q]uit to Previous Menu
Command>