Filter
Top Products
AT-S84 Management Software User’s Guide
Section II: Web Browser Interface 211
Setting the User Interface Configuration
This procedure explains how to adjust the user interface and security
features on the switch. With this procedure you can:
Change the console timer, used to automatically end inactive local
management sessions.
Change the AT-S84 management login user name and password.
Enable and disable the web server, used to manage the switch from a
remote management station with a web browser.
To set the switch’s user interface configuration, perform the following
procedure:
1. From the Basic Config menu, select User Interface > User Interface.
The other selection on this menu, RADIUS, is described in Chapter 27,
“RADIUS Authentication Protocol” on page 285.
The User Interface page is shown in Figure 60.
Figure 60. User Interface Page
The User Interface page has three parts:
Console and Telnet UI Idle Time Out settings