Filter
Top Products
AT-S84 Management Software User’s Guide
Section I: Using the Menus Interface 121
Note
The VLAN is immediately deleted with no confirmation prompt.
Note
You cannot delete the Default VLAN which has a VID of 1.
The VLAN Management Menu is updated to show that the VLAN is
deleted. The untagged port members of a deleted VLAN are
automatically returned to the Default_VLAN with a PVID of 1.
Resetting to the
Default VLAN
The following procedure for deletes all VLANs, except the Default_VLAN,
on a switch. To delete selected VLANs, refer to “Deleting a VLAN” on
page 120.
To reset to the default VLAN, perform the following procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
The Advanced Switch Configuration Menu is shown in Figure 21 on
page 88.
2. From the Advanced Switch Configuration Menu, type V to select VLAN
Management.
The VLAN Management Menu is shown in Figure 28 on page 114.
3. Type R to select Reset VLAN to Default.
The following prompt is displayed:
Are you sure to reset VLAN configuration to factory
default (Y/N)>
4. Type Y for Yes.
The following prompt is displayed:
Reset to factory default completed, press any key to
continue.
5. Press any key.