Filter
Top Products
AT-S84 Management Software User’s Guide
Section I: Using the Menus Interface 45
The following prompt is displayed:
Enter new IP address>
b. Type the IP address for the SNTP server you want to use.
4. To set the SNTP interval:
a. Type I to select Set SNTP Interval.
The following prompt is displayed:
Enter Interval Time>
b. Type a number to specify the number of minutes between
occurrences of polling the SNTP server. The range is 1 to 60
minutes and the default is 1 minute.
5. To set the time zone:
a. Type Z to select Set Time Zone.
The Time Zone Configuration Menu is shown in Figure 9.
Figure 9. Time Zone Configuration Menu
AT-8000/8POE Local Management System
Switch Tools Configuration -> Time Zone Configuration Menu
Time Zone : (GMT+8:00) Taipei
Daylight Saving : Disabled
Type Time Zone Nation or City
---- --------- -----------------------------------
1 (GMT-12:00) Eniwetok,Kwajalein
2 (GMT-11:00) Midway Islands, Samoa
3 (GMT-10:00) Hawaii
4 (GMT-09:00) Alaska
5 (GMT-08:00) Pacific Time (US & Canada):Tijuana
6 (GMT-07:00) Arizona
7 (GMT-07:00) Mountain time (US & Canada)
8 (GMT-06:00) Central Time (US & Canada)
9 (GMT-06:00) Mexico City, Tegucigalpa
10 (GMT-06:00) Saskatchewan
----------------------------- <COMMAND> ----------------------------------
[N]ext Page [S]et Time Zone
[P]revious Page [Q]uit to previous menu
Command>