Filter
Top Products
AT-S84 Management Software User’s Guide
Section II: Web Browser Interface 275
2. In the STP Status column for the port you want to configure, select the
STP status from the list, either Enable or Disable.
3. In the Priority column for the port you want to configure, type a number
for the port priority.
Port priority is described in “Port Priority” on page 148.
4. In the Path Cost column for the port you want to configure, type a
number for the Path Cost.
Path cost is described in “Path Costs and Port Costs” on page 147.
5. Click Apply.
6. To configure all of the ports to the same settings, in the All row,
configure one, two, or all of the following settings: STP Status, Priority,
and Path Cost. Click Apply.
Configuring the
Advanced RSTP
Port Settings
To configure the advanced RSTP port settings, perform the following
procedure:
1. From the Basic Config menu, select Rapid Spanning Tree > RSTP
Adv. Port Config.