Filter
Top Products
Chapter 25: RSTP
276 Section II: Web Browser Interface
The RSTP Advanced Port Configuration page opens, as shown in
Figure 86.
Figure 86. RSTP Advanced Port Configuration Page
2. In the Admin/OperEdge column for the port you want to configure,
choose True or False to set whether or not the port will operate as an
edge port.
3. In the Admin/OperPtoP column for the port you want to configure,
choose a setting based on the information in Table 7.
Table 7. RSTP Point-to-Point Status
Admin Operation Port Duplex Operation
Auto True Full
False Half
True True Full or Half