Filter
Top Products
Chapter 2: Getting Started with the Menus Interface
28 Section I: Using the Menus Interface
Using the Menus Interface
If you are using a DEC VT00 or ANSI (the default) terminal configuration,
refer to Table 1 for instructions on how to move through the menus and
select menu options.
When you enter a letter to select a field in which you can enter a value, a
message is displayed. For example:
Enter new password>
The “>” symbol indicates that you can enter a new value for the parameter
or change the existing value. After you have entered a value, press Enter.
Changes are immediately activated on the AT-9000/24 Gigabit Ethernet
switch.
Note
The web browser interface is described in Section II, “Using the Web
Browser Interface” on page 197, and the command line interface is
described in Section III, “Using the Command Line Interface” on
page 295.
Table 1. Menus Interface Operations
When directed to You must
Make a menu selection Type the menu option letter enclosed
in brackets, such as typing P to select
[P]ort Configuration.
Enter information (for
example, entering a port
number)
Type the information and press Enter.
Return to previous menu Type Q for Quit to previous menu.