Filter
Top Products
AT-S84 Management Software User’s Guide
Section I: Using the Menus Interface 87
device can support in a trunk. If the number is less than eight, the
maximum number for the AT-9000/24 Gigabit Ethernet switch, you
should probably assign a higher system LACP priority to the other
vendor’s switch. If it is more than eight, assign the higher priority to the
AT-9000/24 Gigabit Ethernet switch. This can avoid a possible conflict
between the devices if some ports are placed in the standby mode
when the devices create the trunk. For background information, refer
to “LACP Port Priority Parameter” on page 85.
LACPDU packets are transmitted as untagged packets.