Filter
Top Products
Chapter 17: Basic Switch Parameters
218 Section II: Web Browser Interface
DRAM Size
The size of the DRAM, in megabytes.
Flash Size
The size of the flash memory, in megabytes.
Console Baud Rate
The baud rate of the console port. You cannot change this setting.
Administration Information Section:
System Name
The name assigned to the switch. To give the switch a name, refer to
“Configuring System Administration Information” on page 209.
System Location
The location of the switch. To specify the location, refer to “Configuring
System Administration Information” on page 209.
System Contact
The contact person responsible for managing the switch. To specify
the name of a contact, refer to “Configuring System Administration
Information” on page 209.
System MAC Address, IP Address, Subnet Mask, and Gateway
Section:
MAC Address
The MAC address of the switch. You cannot change this value.
IP Address
The IP address of the switch. Refer to “Configuring an IP Address,
Subnet Mask and Gateway Address” on page 206 to manually assign
an IP address or “Enabling and Disabling the DHCP Client” on
page 208 to activate the DHCP client.
Subnet Mask
The subnet mask for the switch. Refer to “Configuring an IP Address,
Subnet Mask and Gateway Address” on page 206 to manually assign
a subnet mask or “Enabling and Disabling the DHCP Client” on
page 208 to activate the DHCP client.
Default Gateway
Default gateway’s IP address. Refer to “Configuring an IP Address,
Subnet Mask and Gateway Address” on page 206 to manually assign
a gateway address or “Enabling and Disabling the DHCP Client” on
page 208 to activate the DHCP client.
DHCP Mode
The status of the DHCP client on the switch. For information about
setting this parameter, refer to “Enabling and Disabling the DHCP
Client” on page 208.