Filter
Top Products
Chapter 28: Broadcast Storm Control
288 Section II: Web Browser Interface
Configuring Broadcast Storm Control
To configure the broadcast storm control feature, perform the following
procedure:
1. From the Basic Config menu, select Storm Control.
The Broadcast Storm Control page opens, as shown in Figure 90.
Figure 90. Broadcast Storm Control Page
2. From the Storm Control Status list, select Enable to activate the
feature or Disable to deactivate it. The default setting is disabled.
3. If you are activating the feature, from the Threshold Value list select
the desired threshold. Possible values are:
High (3000 broadcast packets per second)
Medium (500 broadcast packets per second)
Low (100 broadcast packets per second)
4. Click Apply.