Filter
Top Products
Chapter 15: Working With System Files
192 Section I: Using the Menus Interface
4. Type S to select Set TFTP Server IP Address.
The following prompt is displayed:
Enter IP address of TFTP server:
5. Type the IP address of the TFTP server and press Enter.
6. Type F to select Set Image File Name.
The following prompt is displayed:
Enter file name>
7. Enter the file name of the AT-S84 image file on the TFTP server and
press Enter.
8. Type R to select Set Retry Count.
The following prompt is displayed:
Enter retry count>
9. Enter the number of times you want the switch to retry in the event a
problem occurs during the download process. The range is 1 to 20,
and the default is 5 times.
10. To begin the download, type U to select Upgrade Image and Reboot.
The following prompt is displayed:
Download file? (Y/N)>
11. Type Y for yes to begin the upgrade or N for no to cancel the
procedure.
If you select yes, the software immediately begins to download the file
onto the switch. After the software download is complete, the switch
initializes the software and reboots. You will lose your local
management connection to the switch during the reboot process.
Note
Do not interrupt the file download and reboot processes.