Filter
Top Products
AT-S84 Management Software User’s Guide
Section I: Using the Menus Interface 77
Displaying Port Statistics
To display statistics about a port, perform the following procedure:
1. From the Main Menu, select Statistics.
The Statistics menu is shown in Figure 18.
Figure 18. Statistics Menu
The statistics for port 1 are displayed in a table that contains the
following columns of information:
Total
The total count for this statistic.
Avg/s
The average count of that statistic per second.
The table contains the following items of information:
Total RX Bytes
Number of bytes received on the port.
Total RX Pkts
Number of packets received on the port.
AT-9000/24 Local Management System
Main Menu -> Statistics Menu
Port: 1 Elapsed Time Since System Up: 003.23.27.17
<Counter Name <Total <Avg./s>
Total RX Bytes 1074684 275
Total RX Pkts 11092 2
Good Broadcast 8842 2
Good Multicast 2235 0
CRC/Align Errors 0 0
Undersize Pkts 0 0
Oversize Pkts 0 0
Fragments 0 0
Jabbers 0 0
Collisions 0 0
64-Byte Pkts 771 0
65-127 Pkts 9521 2
128-255 Pkts 588 0
256-511 Pkts 212 0
512-1023 Pkts 0 0
1024-1522 Pkts 0 0
----------------------- <COMMAND> ------------------------------------
[S]elect/[N]ext/[P]rev. Port Since [R]eset S[t]op Refresh [Q]uit
Command>