Filter
Top Products
5-32 Installation and Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
The total number of faxes successfully printed from all FAX ports using
this COS. Includes fax delivery for fax messages and fax-on-demand
requests.
The number of ports using this COS that are busy at the same time and the
total number of seconds during the reporting period for which that number
of ports were busy.
All Port Statistics
Information in this section includes the total number of incoming and outgoing calls for the message
server, the number of seconds “n” ports were simultaneously busy, the number of seconds message
waiting could not call because too many ports were busy, and the number of seconds a fax call could not
be made because too many fax channels were busy.
The total number of all incoming calls to the message server for the period
of time shown in the header of the report.
The total number of all outgoing calls from the message server for the
period of time shown in the report header. This includes OctelAccess
applications, on-site and off-site message waiting, network messages sent,
alarm calls, test network calls, and fax delivery calls.
The total number of all faxes received for the period of time shown in the
header of the report.
The total number of all faxes printed for fax mail, fax overflow delivery
and fax-on-demand for the period of time shown in the header of the report.
The number of seconds that no outcall was placed because there were too
many busy ports in the group of ports defined to allow outcall. Refer to the
Configuration volume, Slots Table chapter, for a definition of “too busy.”
Total number of seconds a FAX port was not available for fax delivery
outcall.
The number of VOC ports that are busy at the same time and the total
number of seconds during the reporting period for which that number of
VOC ports were busy (e.g. one port was busy for “x” seconds, 36 ports
were busy for “y” seconds, etc.).
The number of FAX ports that are busy at the same time and the total
number of seconds during the reporting period for which that number of
FAX ports were busy.
. To retain accuracy of the Port Statistics report, it is recommended
the report be listed and cleared before changing a port’s COS in the
UPDATE program, or changing the number of ports in System
Parameter 4 — PORTS USED. The System Performance and Port
Statistics reports are both cleared with the CLEAR REPORT
command. Therefore, also list and clear the System Performance
report when listing and clearing the Port Statistics report.
NUMBER OF OUTGOING
FAXES
NUMBER OF PORTS
SIMULTANEOUSLY BUSY
TOTAL NUMBER OF
INCOMING CALLS
TOTAL NUMBER OF
OUTGOING CALLS
TOTAL NUMBER OF
INCOMING FAXES
TOTAL NUMBER OF
OUTGOING FAXES
SECONDS TOO MANY
PORTS BUSY TO MAKE
OUTCALLS
SECONDS TOO MANY
PORTS BUSY TO MAKE
FAX DELIVERY
NUMBER OF VOICE PORTS
SIMULTANEOUSLY BUSY
NUMBER OF FAX PORTS
SIMULTANEOUSLY BUSY