Filter
Top Products
System Errors and Traffic Pegs 8-27
Octel 200/300 S.4.1PB60019−01
Table 8-2 Hardware Error Types and Remedies (continued)
Error Type:Name PriorityRemedySource
42. Configuration
Error (continued)
Error detected in the
configuration tables
Check the configuration tables. 1
15 = NO SELF IP ADDRESS CONFIGURED
17 = SNMP SYSTEM MANAGER NOT KNOWN, TRAP MUST BE SENT
18 = NO AP ERROR MAILBOX (SYSTEM PARAMETER 145).
19 = SELF MUST BE CONFIGURED
SOURCE:
Unable to build network creator’s address for delivery of
a network message.
REMEDY: Add a numbering plan entry for SELF in the
NUMBERING PLAN Table.
1A = OCTELNET SYSTEM MAILBOX NOT CONFIGURED
SOURCE:
The OctelNet System mailbox (System Parameter 248)
has not been configured.
REMEDY: Configure the OctelNet System mailbox. Refer to the
Configuration volume, Remote Analog Networking
chapter, Configuration, System Parameters, and COS
Attributes sections.
1B = OCTELNET SYSTEM MAILBOX DOES NOT HAVE COS ATTRIBUTE 82
SOURCE:
The OctelNet System mailbox does not have Class of
Service Attribute 82.
REMEDY: Add COS Attribute 82 — THIS USER MAY RECEIVE FAX
MESSAGES
, to the COS of the OctelNet System mailbox.
To add COS Attribute 82 requires that a sufficient number
of Fax Mail Plus licenses are authorized.
1C = OCTELNET MAXIMUM FAX TRANSMISSION TIME IS SET TO ZERO
SOURCE:
The OctelNet maximum fax transmission time (System
Parameter 252) is set to zero.
REMEDY: Set System Parameter 252 — OCTELNET: MAX FAX
TRANSMIT TIME
, to at least 1 minute.