Filter
Top Products
Octel 200/300 S.4.1PB60019−01
Chapter 3
PREPARING THE
PHONE SYSTEM
Octel 200/300 installation requires special attention to the telephone
system. This chapter includes topics such as how to identify changes
to the Central Office trunking, and how to make the required
changes to the phone system. Sample letters to the Central Office
and PBX service provider are included to ensure smooth changes
and transition to a new system.
Chapter 4
INSTALLATION
Provides detailed instructions and procedures for installing an
Octel 200/300. The entire process is presented, from receiving and
inspecting to the step-by-step testing of an installed system.
Chapter 5
REPORTS
Explains the Octel 200/300 reports in detail. The reports are
valuable tools that allow service personnel to monitor system
performance in both stand-alone and networked environments. This
section also discusses how to generate the reports and clear the data.
Chapter 6
MAINTENANCE
COMMANDS
Explains and lists the maintenance commands and diagnostics tests.
Chapter 7
LOG COMMANDS
Explains and lists the LOG commands including LOG, Call
Processing Trace and Call Detail Record.
Chapter 8
SYSTEM ERRORS
AND TRAFFIC PEGS
Explains and lists boot ROM, hardware errors, and traffic pegs.
Chapter 9
HARDWARE
REPLACEMENT
Describes the preventive maintenance requirements, the hardware
replacement procedures, and lists the system components and part
numbers.
Chapter 10
DTIC CARD
Describes the Digital Trunk Interface Card (DTIC) used for DTIC
integration. The DTIC is a 30-port line card designed to interface an
Octel 200/300 to E1 (European) trunks. The chapter explains how to
configure, troubleshoot, and maintain the DTIC. The DTIC is
applicable only to specific Lucent channels in Europe and is
available only through those channels.
Chapter 11
LAN CARD
Describes the LAN card and includes details about hardware,
installation, configuration, maintenance, and troubleshooting. The
LAN card is necessary for Digital Networking, LAN Backup and
Restore, or the Gateway Link feature.
Chapter 12
PROCEDURES
Contains the Octel 200/300 procedures. Included are procedures for
backing up, archiving, restoring, recovering and maintaining the
software and configuration database.