Filter
Top Products
Fax
5-47
2-Sided Original
2-Sided Original
You can set the machine to automatically turn over 2-sided originals that are placed in the
feeder, and scan each side separately.
The default setting is <O>.
The 2-sided original mode cannot be used when sending a fax document in the direct sending or manual sending mode.
When you are scanning originals with a horizontal (landscape) orientation, such as LTRR, make sure to place them
horizontally into the feeder. If these originals are placed vertically, the back sides of these originals are scanned upside
down.
For details on how to send the documents, see “Basic Methods for Sending Faxes,” on p. 5-17.
–
–
–
1
Press (Main Menu).
2
Use [▼], [▲] or (Scroll Wheel) to select
<Send/FAX>, then press [OK].
3
Specify a destination.
For details about how to specify destinations, see
“Specifying Destinations,” on p. 5-30.
4
Use [▼], [▲] or (Scroll Wheel) to
display <2-Sided Orig. Orientation Set.>,
then press [OK].
If <Book Type Original> or <Calendar Type
Original> has been selected, <2-Sided Originals
Settings> is displayed.