Filter
Top Products
Fax
5-69
Adjusting the Pause Time
Adjusting the Pause Time
Some overseas dialing may be aected by the distance or complex routing of connections
when dialing the international access code, country code, and the destination’s telephone
number all at once. In such cases, insert a pause after the international access code. When
the machine dials the number, it will pause where the pause was inserted in the number.
This helps to improve the connection.
The default setting is <2 Seconds>.
You can insert a pause on the screen where you specify the fax number. (See “Dialing an Overseas Number (With Pauses),”
on p. 5-22.)
Pauses entered at the end of dialed fax numbers are always 10 seconds long.
–
–
1
Press (Main Menu).
2
Press the right Any key to select
<Additional Func.>.
3
Use [▼], [▲] or (Scroll Wheel) to select
<Communications Settings>, then press
[OK].
4
Use [▼], [▲] or (Scroll Wheel) to select
<Fax Settings>, then press [OK].
5
Use [▼], [▲] or (Scroll Wheel) to select
<TX Settings>, then press [OK].