Filter
Top Products
iii
Network Processing Engine and Network Services Engine Installation and Configuration
OL-4448-12
Preface
Related Documentation
Related Documentation
Your router and the Cisco IOS software running on it contain extensive features and functionality, which
are documented in the following resources:
• Cisco IOS software:
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco
IOS software configuration documentation set that
corresponds to the software release installed on your Cisco
hardware.
Note You can access Cisco IOS software configuration and hardware installation and
maintenance documentation on the World Wide Web at http://www.cisco.com. Translated
documentation is available at http://www.cisco.com/public/countries_languages.shtml.
• For the NPE-G1, see the NPE-G1 Read Me First document, which is available at the following URL:
http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/ubr7246vxr/upgrade/guide/15066R.html
• For the Cisco uBR7200-NPE-G1, see the Cisco uBR7200-NPE-G1 Read Me First document, which
is available at the following URL:
http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/ubr7246vxr/upgrade/guide/15066R.html
• For information on the Cisco 7200 series routers, refer to the following publications:
Your Cisco 7200 series routers contain extensive features and functionality, which are documented in the
following resources:
Chapter 5 NPE-G1 Overview Describes the NPE-G1—components, system
management functions, and memory
specifications.
Chapter 6 NPE-G2 Overview Describes the NPE-G2—components, system
management functions, and memory
specifications.
Chapter 7 NPE-G1 and NPE-G2 Installation
and Configuration Information
Provides installation and configuration
information for the NPE-G1 and NPE-G2.
Chapter 8 Preparation for Installation Describes safety considerations, tools required,
and procedures you should perform before the
actual installation.
Chapter 9 Removing and Installing the NPE or
NSE
Describes the procedures for installing and
removing the network processing engine or
network services engine in the supported
platforms.
Chapter 10 Configuration Tasks and
Troubleshooting Information
Provides instructions for configuring the NSE-1
and troubleshooting information for both the
NPEs and NSE-1. It also provides power supply
removal information.
Section Title Description