Filter
Top Products
8-5
Network Processing Engine and Network Services Engine Installation and Configuration
OL-4448-12
Chapter 8 Preparation for Installation
Software and Hardware Requirements
• Cisco uBR7246VXR Cisco IOS Release
12.1(6)EC or later
releases of 12.1EC with
a special boot helper
image of
12.0(15)SC
[ubr7200-boot-mz.120-
15.SC]
Cisco IOS Release
12.2(4)BC1 or later
releases of 12.2BC
Cisco IOS Release
12.3(9a)BC or later
releases of 12.3BC
Cisco IOS Release
12.2(11)CX
3
with a
special boot helper
image of
12.2(11)CX
[ubr7200-boot-mz.
122-11.CX or
ubr7200-kboot-mz.
122-11.CX]
Cisco IOS Release
12.2(33)SCA or
later releases of
12.2S
Cisco IOS Release
12.2(33)SCA
4
Note The NPE-G2 uses
software images
that begin with
the prefix
“ubr7200p-”.
• Cisco uBR7225VXR — Cisco IOS Release
12.2(33)
Cisco IOS Release
12.2(33)SCA with a
boot helper image
[ubr7200-boot-mz.
122-33.SCA] or
[ubr7200-kboot-mz
.122-33.SCA]
Cisco IOS Release 12.2S
1. The NPE-G2 has its own Cisco IOS software image with the prefix “c7200p-” in the software images filenames, including
the boot image. The NPE-G2 does not boot up with a software image with the prefix “c7200-”. Previous network processing
engines, or the network services engine, do not boot up with the “c7200p-” boot image. They use the prefix “c7200-”.
2. For information about the Cisco 7206 or Cisco 7206VXR as router shelves in the Cisco AS5800 Universal Access Server,
refer to the Cisco
AS5800 Universal Access Server documentation listed in the “Related Documentation” section on page iii.
3. The Cisco uBR7246VXR universal broadband router requires the Cisco uBR7200-NPE-G1 version of the NPE-G1.
4. The Cisco uBR7246VXR universal broadband router requires the Cisco uBR7200-NPE-G2 version of the NPE-G2.
Ta ble 8-5 Software Requirements for the NPE-100, NPE-150, NPE-200, and NPE-300
Router Platform
1
Network Processing Engine
NPE-100
2
NPE-150
2
NPE-200
2
NPE-300
2
Cisco 7200 series
• Cisco 7204VXR
and
Cisco 7206VXR
Cisco IOS Release 12.0(2)XE2 or later releases of 12.0XE
Cisco IOS Release 12.0(3)T or later releases of 12.0T
Table 8-4 Software Requirements for the NPE-400, NPE-G1, and NPE-G2
Network Processing Engine
Router Platform NPE-400 NPE-G1 NPE-G2