Filter
Top Products
8-7
Network Processing Engine and Network Services Engine Installation and Configuration
OL-4448-12
Chapter 8 Preparation for Installation
Software and Hardware Requirements
Cisco uBR7200 series
• Cisco uBR7246VXR — — — Cisco IOS Release
12.0(6)SC or later
releases of 12.0SC
Cisco IOS Release
12.1(3)EC1 or later
releases of 12.1 EC
Cisco IOS Release
12.2(4)BC1 or later
releases of 12.2BC
• Cisco uBR7246 and
Cisco
uBR7223
— Cisco IOS Release 11.3(6)NA
or later releases of 11.3NA
Cisco IOS Release 12.0(6)SC or later releases of
12.0SC
Cisco IOS Release 12.1(3)EC1 or later releases of
12.1EC
Cisco IOS Release 12.2(4)BC1 or later releases of
12.2BC
—
1. The NPE-300 is not supported in the Cisco 7202, Cisco 7204, or Cisco 7206 routers.
2. Cisco IOS Release 12.1(5)T and later releases of 12.1T require a minimum of 128 MB of SRAM or SDRAM.
3. For information about the Cisco 7206 or Cisco 7206VXR as router shelves in the Cisco AS5800 Universal Access Server, refer to the Cisco AS5800
Universal Access Server documentation listed in the
“Related Documentation” section on page iii.
Ta ble 8-6 Software Requirements for the NPE-175, NPE-225, and NSE-1
NPE or NSE
Router Platform NPE-175
1
NPE-225
1
NSE-1
Cisco 7200 Series
• Cisco 7204VXR and
Cisco
7206VXR
Cisco IOS Release 12.0(4)XE or later releases of 12.0XE
Cisco IOS Release 12.0(5)T or later releases of 12.0T
Cisco IOS Release 12.1E or
Cisco
IOS Release 12.1(5)T or
later releases of 12.1T
Table 8-5 Software Requirements for the NPE-100, NPE-150, NPE-200, and NPE-300 (continued)
Router Platform
1
Network Processing Engine
NPE-100
2
NPE-150
2
NPE-200
2
NPE-300
2