Filter
Top Products
8-8
Network Processing Engine and Network Services Engine Installation and Configuration
OL-4448-12
Chapter 8 Preparation for Installation
Software and Hardware Requirements
Safety Guidelines
Following are safety guidelines that you should follow when working with any equipment that connects
to electrical power or telephone wiring.
Warning
Only trained and qualified personnel should be allowed to install or replace this equipment.
Statement 1030
• Cisco 7204 and
Cisco
7206
Cisco IOS Release 12.0(4)XE or later releases of 12.0XE
Cisco IOS Release 12.0(5)T or later releases of 12.0T
—
Cisco uBR7200 series
2
• Cisco uBR7246VXR,
Cisco
uBR7246, and
Cisco
uBR7223
— Cisco IOS Release
12.0(6)SC or later releases
of 12.0SC
Cisco IOS Release
12.1(3)EC1 or later releases
of 12.1 EC
Cisco IOS Release
12.2(4)BC1 or later releases
of 12.2BC
—
1. Cisco IOS Release 12.1(5)T and later releases of 12.1T require a minimum of 128 MB of SRAM or SDRAM.
2. Previous documents stated that the Cisco uBR7200 series routers supported the NPE-175. Because the NPE-175 has reached its end of life and was never
made orderable for the Cisco
uBR7200 series routers, the NPE-175 is no longer shown as supported for the Cisco uBR7200 series routers.
Table 8-6 Software Requirements for the NPE-175, NPE-225, and NSE-1 (continued)
NPE or NSE
Router Platform NPE-175
1
NPE-225
1
NSE-1