Filter
Top Products
3. Connect the Ethernet cable.
4. Connect the fiber-optic cables.
5. Connect power to the switch.
6. Turn on the power. The switch runs a series of power-on self test (POST)
tests. The DS-DSGGC-AA has no power switch; power is applied when
the unit is plugged in.
7. Set the switch IP address and subnet mask (see Section 6.5.1.2.2). You
can also set the switch name if desired (see Section 6.5.1.2.5). The
switch IP address and subnet mask must initially be set from the front
panel, except for the DS-DSGGB-AA or DS-DSGGC-AA 8-port Fibre
Channel switches. In this case you have to set the IP address from the
PC or terminal. You must use a telnet session to set the switch name.
8. Reboot the switch to enable the change in IP address and subnet mask
to take effect.
For more information on the individual switches, see the following
documentation:
• Compaq StorageWorks Fibre Channel Storage Switch User’s Guide
• Compaq StorageWorks SAN Switch 8 Installation and Hardware Guide
• Compaq StorageWorks SAN Switch 16 Installation and Hardware Guide
• Compaq StorageWorks Fibre Channel SAN Switch 8-EL Installation
and Hardware Guide
For more information on managing a Fibre Channel switch, see the Compaq
StorageWorks Fibre Channel SAN Switch Management Guide.
For more information on the SAN switch fabric operating system, see the
Compaq StorageWorks SAN Switch Fabric Operating System Management
Guide
6.5.1.2 Managing the Fibre Channel Switches
You can manage the DS-DSGGA-AA, DS-DSGGA-AB, and DS-DSGGB-AB
switches, and obtain switch status from the front panel, by making a telnet
connection or by accessing the Web. The DS-DSGGB-AA and DS-DSGGC-AA
Fibre Channel switches do not have a front panel, so you must use a telnet
connection or use Web access.
Before you can make a telnet connection or access the switch via the Web,
you must assign an IP address and subnet mask to the Ethernet connection
using the front panel or from a PC or terminal (DS-DSGGB-AA and
DS-DSGGC-AA). You may have to modify the DS-DSGGC-AA IP address
from the default of 10.77.77.77.
6–18 Using Fibre Channel Storage