Chapter 7 Describes the use of AlphaServer™ GS80, GS160, or GS320 hardware
partitions in a TruCluster Server configuration.
Chapter 8 Describes how to configure a shared SCSI bus for tape drive,
tape loader, or tape library usage.
Chapter 9 Describes the requirements for a shared SCSI bus using externally
terminated configurations and radial configurations using
non-UltraSCSI RAID array controllers.
Chapter 10 Describes how to prepare systems and host bus adapters for the
TruCluster Server configurations described in Chapter 9.
Appendix A Provides a blank table to use to convert from the HSG80 unit
numbers to
/dev/disk/dskn and device names for an actual
Fibre Channel TruCluster Server configuration.
Related Documents
Consult the following manuals for assistance in TruCluster Server
installation, administration, and programming tasks:
• TruCluster Server Software Product Description (SPD) — The
comprehensive description of the TruCluster Server Version 5.1 product.
You can find the latest version of the SPD and other TruCluster Server
documentation at the following URL:
http://www.tru64unix.compaq.com/faqs/publications/pub_page/cluster_list.html
• Release Notes — Provides important information about TruCluster
Server Version 5.1.
• Technical Overview — Provides an overview of the TruCluster Server
technology.
• Software Installation — Describes how to install the TruCluster Server
product.
• Cluster Administration — Describes cluster-specific administration
tasks.
• Highly Available Applications — Describes how to deploy applications on
a TruCluster Server cluster.
Consult the following AlphaServer GS80/160/320 documentation to assist
you in configuring an AlphaServer GS80, GS160, or GS320 system in a
TruCluster Server configuration:
• Installation Guide
• System Management Console Installation and User’s Guide
• User’s Guide
• Firmware Reference Manual
xviii About This Manual