Filter
Top Products
Figure 8–3: DS-TZ89N-VW SCSI ID Switches
Snap−in
Locking
Handles
SCSI ID
Switch Pack
Backplane
Interface
Connector
DS−TZ89N−VW
The SCSI ID is selected by switch positions, which must be selected before
the tape drive is installed in the BA356. Table 8–3 shows the switch settings
for the DS-TZ89N-VW.
Table 8–3: DS-TZ89N-VW Switch Settings
SCSI ID SCSI ID Selection Switches
1234
5
6
7
8
Automatic
a
Off Off Off Off On On On On
0
Off Off Off Off Off Off Off Off
1
On Off Off Off Off Off Off Off
2
Off On Off Off Off Off Off Off
3
On On Off Off Off Off Off Off
4
Off Off On Off Off Off Off Off
Configuring a Shared SCSI Bus for Tape Drive Use 8–7