Filter
Top Products
HOST_ID=1000-0000-C921-09F7 ADAPTER_ID=1000-0000-C921-09F7
!NEWCON58 TRU64_UNIX OTHER 1 offline 0
HOST_ID=1000-0000-C921-09F7 ADAPTER_ID=1000-0000-C921-09F7
!NEWCON59 TRU64_UNIX THIS 1 offline 0
HOST_ID=1000-0000-C921-09F7 ADAPTER_ID=1000-0000-C921-09F7
!NEWCON60 TRU64_UNIX OTHER 2 offline 100
HOST_ID=1000-0000-C921-09F7 ADAPTER_ID=1000-0000-C921-09F7
!NEWCON61 TRU64_UNIX THIS 2 210513 OL this 100
HOST_ID=1000-0000-C921-086C ADAPTER_ID=1000-0000-C921-086C
!NEWCON62 TRU64_UNIX OTHER 1 210513 OL other 0
HOST_ID=1000-0000-C921-086C ADAPTER_ID=1000-0000-C921-086C
!NEWCON63 TRU64_UNIX OTHER 1 offline 0
HOST_ID=1000-0000-C921-0943 ADAPTER_ID=1000-0000-C921-0943
!NEWCON64 TRU64_UNIX OTHER 1 210413 OL other 0
HOST_ID=1000-0000-C920-EDA0 ADAPTER_ID=1000-0000-C920-EDA0
!NEWCON65 TRU64_UNIX OTHER 2 210513 OL other 100
HOST_ID=1000-0000-C921-086C ADAPTER_ID=1000-0000-C921-086C
.
.
.
The following connections are shown to have nonzero offsets:
!NEWCON49, !NEWCON51, !NEWCON55, !NEWCON56, !NEWCON57,
!NEWCON60, !NEWCON61, and !NEWCON65
4. Set the unit offset to 0 for each connection that has a nonzero unit offset:
HSG80> SET !NEWCON49 UNIT_OFFSET = 0
HSG80> SET !NEWCON51 UNIT_OFFSET = 0
HSG80> SET !NEWCON55 UNIT_OFFSET = 0
HSG80> SET !NEWCON56 UNIT_OFFSET = 0
HSG80> SET !NEWCON57 UNIT_OFFSET = 0
HSG80> SET !NEWCON60 UNIT_OFFSET = 0
HSG80> SET !NEWCON61 UNIT_OFFSET = 0
HSG80> SET !NEWCON65 UNIT_OFFSET = 0
5. At the console of each system accessing storage units on this HSG80,
follow these steps:
a. Use the wwid manager to show the Fibre Channel environment
variables and determine which units are reachable by the system.
This is the information the console uses, when not in wwidmgr
mode, to find Fibre Channel devices:
P00>>> wwidmgr -show ev
wwid0 133 1 WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002e
wwid1 131 1 WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002f
wwid2 132 1 WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-0030
wwid3
N1 50001fe100000d64
N2
N3
N4
6–60 Using Fibre Channel Storage