FCP,6–4
Fibre Channel
arbitrated loop
,6–8
data rates
,6–4
distance,6–4
F_Port,6–6
fabric,6–5, 6–7
FL_Port,6–5
frame,6–5
N_Port,6–5
NL_Port,6–5
point-to-point,6–6
restrictions,2–5
supported configurations,6–9
switch installation
,6–16
terminology,6–5
topology,6–6, 6–64
Fibre Channel Protocol
(
See FCP )
file
/var/adm/messages
,6–27
firmware
35/70 DLT tape drives
,8–75
ESL9326D,8–75
fail-safe loader
,7–18
HSG80,6–29
KZPBA-CB,2–9, 4–7, 7–13, 10–5
KZPSA,10–18
KZPSA-BB,2–8, 2–9, 10–5t,
10–18
obtaining release notes,4–4
reset system for update,7–21,
10–19
SRM console,4–7t, 7–4, 10–5t,
10–18
SROM,7–18
TL894,8–37
TL895,8–44
update CD-ROM,4–4
updating,10–18
updating GS80/160/320,7–18
FL_Port,6–5
G
GBIC,2–7, 6–17
GigaBit Interface Converter
( See GBIC )
Gigabit Link Module
( See GLM )
GLM,2–7
H
hard partition
defined
,7–1
repartitioning,7–8
requirements,7–2
hardware components
SCSI adapters
,2–5
SCSI cables,2–12
SCSI signal converters
,2–11
storage shelves,9–9
terminators,2–14
trilink connectors,2–14
hardware configuration
bus termination
,3–7, 9–5
disk devices
,3–16, 9–14
hardware requirements for
,2–1
hardware restrictions for,2–1
requirements,3–1, 9–1
SCSI bus adapters,2–5
SCSI bus speed,3–5
SCSI cables
,2–12
SCSI signal converters,9–2
storage shelves,3–16, 9–14
supported cables,2–1
supported terminators
,2–1
supported trilinks,2–1
supported Y cables,2–1
terminators,2–14
trilink connectors,2–14
hierarchical switch power manager
( See HPM )
host bus adapters
Index–5