Filter
Top Products
6.6.2
Install the Tru64 UNIX Operating System .................. 6–51
6.6.3
Determining /dev/disk/dskn to Use for a Cluster
Installation ........................................................
6–51
6.6.4
Label the Disks to Be Used to Create the Cluster ..........
6–53
6.6.5
Install the TruCluster Server Software and Create the
First Cluster Member ...............
............................
6–53
6.6.6
Reset the bootdef_dev Console Environment Variable ..... 6–53
6.6.7
Add Additional Systems to the Cluster ....................... 6–55
6.7
Converting the HSG80 from Transparent to Multiple-Bus
Failover Mode .........................................................
6–57
6.7.1
Overview ..........................................................
6–58
6.7.2
Procedure to Convert from Transparent to Multiple-bus
Failover Mode .....................................................
6–59
6.8
Using the emx Manager to Display Fibre Channel Adapter
Information ............................................................
6–62
6.8.1
Using the emxmgr Utility to Display Fibre Channel
Adapter Information .............................................
6–62
6.8.2
Using the emxmgr Utility Interactively ...................... 6–65
7 Using GS80, GS160, or GS320 Hard Partitions in a TruCluster
Server Configuration
7.1
Overview ...............................................................
7–1
7.2
Hardware Requirements for a Hard Partition in a Cluster .... 7–2
7.3
Configuring Partitioned GS80, GS160, or GS320 Systems in a
TruCluster Configuration ............................................
7–7
7.3.1
Repartitioning a Single-Partition AlphaServer
GS80/160/320 as Two Partitions in a Cluster ................ 7–7
7.4
Determining AlphaServer GS80/160/320 System
Configuration .......................................................... 7–14
7.5
Updating GS80/160/320 Firmware ................................. 7–18
7.5.1
Updating AlphaServer GS80/160/320 Firmware ............ 7–18
8 Configuring a Shared SCSI Bus for Tape Drive Use
8.1
Preparing the TZ88 for Shared Bus Usage ....................... 8–1
8.1.1
Setting the TZ88N-VA SCSI ID ............................... 8–2
8.1.2
Cabling the TZ88N-VA .......................................... 8–3
8.1.3
Setting the TZ88N-TA SCSI ID ............................... 8–5
8.1.4
Cabling the TZ88N-TA .......................................... 8–5
8.2
Preparing the TZ89 for Shared SCSI Usage ...................... 8–6
8.2.1
Setting the DS-TZ89N-VW SCSI ID .......................... 8–6
Contents vii