Filter
Top Products
Example 6–2: Setting Up the Mirrorset (cont.)
HSG80> CREATE_PARTITION BOOT-MIR SIZE=25 5
HSG80> CREATE_PARTITION BOOT-MIR SIZE=25 5
HSG80> CREATE_PARTITION BOOT-MIR SIZE=LARGEST 5
HSG80> CREATE_PARTITION CROOT-MIR SIZE=5 6
HSG80> CREATE_PARTITION CROOT-MIR SIZE=15 6
HSG80> CREATE_PARTITION CROOT-MIR SIZE=40 6
HSG80> CREATE_PARTITION CROOT-MIR SIZE=LARGEST 6
HSG80> SHOW BOOT-MIR 7
Name Storageset Uses Used by
---------------------------------------------------------------------
BOOT-MIR mirrorset DISK30200
DISK40000
Switches:
POLICY (for replacement) = BEST_PERFORMANCE
COPY (priority) = NORMAL
READ_SOURCE = LEAST_BUSY
MEMBERSHIP = 2, 2 members present
State:
UNKNOWN -- State only available when configured as a unit
Size: 8378028 blocks
Partitions:
Partition number Size Starting Block Used by
---------------------------------------------------------------------
1 2094502 ( 1072.38 MB) 0
8
2 2094502 ( 1072.38 MB) 2094507 9
3 4189009 ( 2144.77 MB) 4189014 10
HSG80>
HSG80> SHOW CROOT-MIR
11
Name Storageset Uses Used by
------------------------------------------------------------------------------
CROOT-MIR mirrorset DISK30300
DISK40100
Switches:
POLICY (for replacement) = BEST_PERFORMANCE
COPY (priority) = NORMAL
READ_SOURCE = LEAST_BUSY
MEMBERSHIP = 2, 2 members present
State:
UNKNOWN -- State only available when configured as a unit
Size: 8378028 blocks
Partitions:
Partition number Size Starting Block Used by
---------------------------------------------------------------------
1 418896 ( 214.47 MB) 0
12
2 1256699 ( 643.42 MB) 418901 13
3 3351206 ( 1715.81 MB) 1675605 14
4 3351207 ( 1715.81 MB) 5026816 15
1 Use the CONFIG utility to configure the devices on the device side buses
and add them to the controller configuration. The CONFIG utility takes
about 2 minutes to complete. You can use the ADD DISK command to
add disk drives to the configuration manually.
6–38 Using Fibre Channel Storage