Filter
Top Products
8.2.2
Cabling the DS-TZ89N-VW Tape Drives ..................... 8–8
8.2.3
Setting the DS-TZ89N-TA SCSI ID ........................... 8–9
8.2.4
Cabling the DS-TZ89N-TA Tape Drives ...................... 8–9
8.3
Compaq 20/40 GB DLT Tape Drive ................................
8–10
8.3.1
Setting the Compaq 20/40 GB DLT Tape Drive SCSI ID .. 8–10
8.3.2
Cabling the Compaq 20/40 GB DLT Tape Drive .............
8–11
8.4
Compaq 40/80-GB DLT Drive ....................................... 8–14
8.4.1
Setting the Compaq 40/80-GB DLT Drive SCSI ID ........ 8–14
8.4.2
Cabling the Compaq 40/80-GB DLT Drive ................... 8–15
8.5
Preparing the TZ885 for Shared SCSI Usage .................... 8–17
8.5.1
Setting the TZ885 SCSI ID .................................... 8–17
8.5.2
Cabling the TZ885 Tape Drive ................................ 8–18
8.6
Preparing the TZ887 for Shared SCSI Bus Usage ............... 8–20
8.6.1
Setting the TZ887 SCSI ID .................................... 8–20
8.6.2
Cabling the TZ887 Tape Drive ................................ 8–21
8.7
Preparing the TL891 and TL892 DLT MiniLibraries for
Shared SCSI Usage ...................................................
8–23
8.7.1
Setting the TL891 or TL892 SCSI ID ......................... 8–23
8.7.2
Cabling the TL891 or TL892 MiniLibraries ................. 8–25
8.8
Preparing the TL890 DLT MiniLibrary Expansion Unit ....... 8–29
8.8.1
TL890 DLT MiniLibrary Expansion Unit Hardware ....... 8–29
8.8.2
Preparing the DLT MiniLibraries for Shared SCSI Bus
Usage ..............................................................
8–29
8.8.2.1
Cabling the DLT MiniLibraries ........................... 8–30
8.8.2.2
Configuring a Base Module as a Slave ................... 8–33
8.8.2.3
Powering Up the DLT MiniLibrary ....................... 8–34
8.8.2.4
Setting the TL890/TL891/TL892 SCSI ID ............... 8–35
8.9
Preparing the TL894 DLT Automated Tape Library for Shared
SCSI Bus Usage ....................................................... 8–36
8.9.1
TL894 Robotic Controller Required Firmware .............. 8–37
8.9.2
Setting TL894 Robotics Controller and Tape Drive SCSI
IDs .................................................................. 8–37
8.9.3
TL894 Tape Library Internal Cabling ........................ 8–39
8.9.4
Connecting the TL894 Tape Library to the Shared SCSI
Bus ................................................................. 8–41
8.10
Preparing the TL895 DLT Automated Tape Library for Shared
SCSI Bus Usage ....................................................... 8–43
8.10.1
TL895 Robotic Controller Required Firmware .............. 8–44
8.10.2
Setting the TL895 Tape Library SCSI IDs ................... 8–44
8.10.3
TL895 Tape Library Internal Cabling ........................ 8–45
8.10.4
Upgrading a TL895 .............................................. 8–47
viii Contents