Compaq AA-RHGWC-TE Server User Manual


 
arbitration enabled when connecting four-member systems to a
common SCSI bus.
The following items pertain to the AlphaServer GS80/160/320 systems:
Hot swapping modules is not supported.
High power peripheral component interconnect (PCI) modules
(approximately 25 watts or greater) must be placed in PCI slots with
1 inch module pitch; any slot except 0-5, 0-6, 1-5, and 1-6.
A primary or expansion PCI drawer contains two 3-slot PCI buses
and two 4-slot PCI buses (see Figure 21):
PCI0 for I/O riser 0: Slots 0-0/1, 0-2, and 0-3
PCI1 for I/O riser 0: Slots 0-4, 0-5, 0-6, and 0-7
PCI0 for I/O riser 1: Slots 1-1, 1-2, and 1-3
PCI1 for I/O riser 1: Slots 1-4, 1-5, 1-6, and 1-7
___________________ Note ___________________
Slot 0-0/1 in a primary PCI drawer contains the standard
I/O module.
Figure 21: PCI Backplane Slot Layout
I/O Riser 0
I/O Riser 1
0-0/10-20-30-40-50-60-71-11-21-31-41-51-61-7
PCI 0
PCI 1
PCI 1
PCI 0
1-R 0-R
ZK-1748U-AI
TruCluster Server does not support the XMI CIXCD on an AlphaServer
8x00, GS60, GS60E, or GS140 system.
22 Hardware Requirements and Restrictions