Filter
Top Products
110 Configuring System Information
www.dell.com | support.dell.com
– —Indicates the redundant power supply is not operating normally for the
specified unit.
– Not Present—Indicates that the power supply is not present for the specified unit.
Viewing System Health Information Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the System Health page.
The following is an example of the CLI commands:
Console> show system
System Description: Ethernet Stackable
Switching System
System Up Time (days,hour:min:sec): 0,00:08:56
System Contact: Dell_Tech_Supp
System Name: dell
System Location: New_York
Viewing the Versions Page
The Versions page contains information about the hardware and software versions currently
running. To open the Versions page:
• Click System > General > Versions in the Tree View. The Versions page opens.
CLI Command Description
show system Displays system information.