Filter
Top Products
212 Configuring Switch Information
www.dell.com | support.dell.com
The following table describes the parameter combination settings required to configure
ports. These settings ensure that configuration functionalities are maintained.
• Current MDI/MDIX—Indicates the MDIX operational status. The possible field
values are:
–MDI
–MDIX
– Auto—Indicates that the value is set automatically.
• LAG—Specifies if the port is part of a LAG.
Defining Port Parameters:
1 Open the Port Configuration page.
2 Select a port in the Port field.
3 Define the Description, Admin Status, Admin Speed, Admin Duplex, Auto
Negotiation, Back Pressure, Admin Auto MDIX and/or Admin Flow Control fields.
4 Click Apply Changes. The port parameters are saved to the device.
Modifying Port Parameters:
1 Open the Port Configuration page.
2 Select a port in the Port field.
3 Modify the Description, Admin Status, Admin Speed, Admin Duplex, Auto
Negotiation, Back Pressure, Admin Auto MDIX and/or Admin Flow Control fields.
4 Click Apply Changes. The port parameters are saved to the device.
Displaying the Port Configuration Table:
1 Open the Port Configuration page.
2 Click Show All. The Port Configuration Table opens.
Auto Negotiation
Enabled Disabled
Auto legal illegal
MDI legal legal
MDIX legal legal