Filter
Top Products
Configuring Switch Information 265
VLAN LAG Setting Page
The VLAN LACP Parameters page contains the following fields:
• LAG—Indicates the LAG number included in the VLAN.
• Port Mode—Indicates the port mode. The possible field values are:
– General—Indicates that the LAG belongs to one or more VLANs, and each VLAN
is user-defined as tagged or untagged (full 802.1Q compliance).
– Access—Indicates that the LAG belongs to a single untagged VLAN.
– Trunk—Indicates that the LAG belongs to a VLAN where all frames are tagged
(except for an optional single native VLAN).
• PVID—Assigns a VLAN ID to untagged packets. In order for LAGs to assign PVIDs,
the LAG must be defined as untagged in the VLAN Port Membership Table.
• Frame Type—Indicates the packet type accepted by the LAG. The possible field
values are:
– Admit Tag Only—Indicates that only tagged packets are accepted by the LAG.
– Admit All—Indicates that both tagged and untagged packets are accepted by the
LAG.