Filter
Top Products
218 Configuring Switch Information
www.dell.com | support.dell.com
• Current LAG Status—Specifies the LAG status. The possible field values are:
– Up—Indicates the LAG is currently operating.
– Down—Indicates the LAG is currently non-operational.
• Admin Auto Negotiation—Enables Auto Negotiation on the LAG. Auto-negotiation
is a protocol between two link partners that enables a LAG to advertise its
transmission rate, duplex mode, and flow control (the flow control default is disabled)
abilities to its partner. The possible field values are:
– Enable—Enables auto negotiation on the LAG.
– Disable—Disables auto negotiation on the LAG.
• Current Auto Negotiation—Indicates the current Auto Negotiation setting. The
possible field values are:
–Enable
– Disable
• Admin Speed—Indicates the speed at which the LAG is operating. This value can be
entered only if the LAG is disabled. The possible field values are:
–10M
–100M
– 1000M
• Current LAG Speed—Specifies the synchronized LAG speed in bps. The possible
field values are:
–10M
–100M
– 1000M
• Current Duplex Mode—Specifies the LAG conversation type. The current field
values are:
– Full—The interface supports transmission between the device and the client in
both directions simultaneously.
– Half—The interface supports transmission between the device and the client in
only one direction at a time.
• Admin Current Duplex Mode—Specifies the LAG conversation type. The current
field values are:
– Full—The interface supports transmission between the device and the client in
both directions simultaneously.